FLA_Tevd_v_opt_var2.c File Reference

(r)

Functions
FLA_Error	FLA_Tevd_v_opt_var2 (dim_t n_iter_max, FLA_Obj d, FLA_Obj e, FLA_Obj G, FLA_Obj R, FLA_Obj W, FLA_Obj U, dim_t b_alg)
FLA_Error	FLA_Tevd_v_ops_var2 (int m_A, int m_U, int n_G, int n_iter_max, float *buff_d, int inc_d, float *buff_e, int inc_e, scomplex *buff_G, int rs_G, int cs_G, float *buff_R, int rs_R, int cs_R, float *buff_W, int rs_W, int cs_W, float *buff_U, int rs_U, int cs_U, int b_alg)
FLA_Error	FLA_Tevd_v_opd_var2 (int m_A, int m_U, int n_G, int n_iter_max, double *buff_d, int inc_d, double *buff_e, int inc_e, dcomplex *buff_G, int rs_G, int cs_G, double *buff_R, int rs_R, int cs_R, double *buff_W, int rs_W, int cs_W, double *buff_U, int rs_U, int cs_U, int b_alg)
FLA_Error	FLA_Tevd_v_opc_var2 (int m_A, int m_U, int n_G, int n_iter_max, float *buff_d, int inc_d, float *buff_e, int inc_e, scomplex *buff_G, int rs_G, int cs_G, float *buff_R, int rs_R, int cs_R, scomplex *buff_W, int rs_W, int cs_W, scomplex *buff_U, int rs_U, int cs_U, int b_alg)
FLA_Error	FLA_Tevd_v_opz_var2 (int m_A, int m_U, int n_G, int n_iter_max, double *buff_d, int inc_d, double *buff_e, int inc_e, dcomplex *buff_G, int rs_G, int cs_G, double *buff_R, int rs_R, int cs_R, dcomplex *buff_W, int rs_W, int cs_W, dcomplex *buff_U, int rs_U, int cs_U, int b_alg)

Function Documentation

FLA_Tevd_v_opc_var2()

FLA_Error FLA_Tevd_v_opc_var2	(	int	m_A,
		int	m_U,
		int	n_G,
		int	n_iter_max,
		float *	buff_d,
		int	inc_d,
		float *	buff_e,
		int	inc_e,
		scomplex *	buff_G,
		int	rs_G,
		int	cs_G,
		float *	buff_R,
		int	rs_R,
		int	cs_R,
		scomplex *	buff_W,
		int	rs_W,
		int	cs_W,
		scomplex *	buff_U,
		int	rs_U,
		int	cs_U,
		int	b_alg
	)

{
    FLA_Check_error_code( FLA_NOT_YET_IMPLEMENTED );
 
    return FLA_SUCCESS;
}

References i.

Referenced by FLA_Tevd_v_opt_var2().

FLA_Tevd_v_opd_var2()

FLA_Error FLA_Tevd_v_opd_var2	(	int	m_A,
		int	m_U,
		int	n_G,
		int	n_iter_max,
		double *	buff_d,
		int	inc_d,
		double *	buff_e,
		int	inc_e,
		dcomplex *	buff_G,
		int	rs_G,
		int	cs_G,
		double *	buff_R,
		int	rs_R,
		int	cs_R,
		double *	buff_W,
		int	rs_W,
		int	cs_W,
		double *	buff_U,
		int	rs_U,
		int	cs_U,
		int	b_alg
	)

{
    dcomplex  one   = bl1_z1();
    double    rone  = bl1_d1();
    double    rzero = bl1_d0();
 
    dcomplex* G;
    double*   d1;
    double*   e1;
    int       r_val;
    int       done;
    int       m_G_sweep_max;
    int       ij_begin;
    int       ijTL, ijBR;
    int       m_A11;
    int       n_iter_perf;
    int       n_U_apply;
    int       total_deflations;
    int       n_deflations;
    int       n_iter_prev;
    int       n_iter_perf_sweep_max;
 
    // Initialize our completion flag.
    done = FALSE;
 
    // Initialize a counter that holds the maximum number of rows of G
    // that we would need to initialize for the next sweep.
    m_G_sweep_max = m_A - 1;
 
    // Initialize a counter for the total number of iterations performed.
    n_iter_prev = 0;
 
    // Initialize R to identity.
    bl1_dident( m_A,
                buff_R, rs_R, cs_R );
 
    // Iterate until the matrix has completely deflated.
    for ( total_deflations = 0; done != TRUE; )
    {
 
        // Initialize G to contain only identity rotations.
        bl1_zsetm( m_G_sweep_max,
                   n_G,
                   &one,
                   buff_G, rs_G, cs_G );
 
        // Keep track of the maximum number of iterations performed in the
        // current sweep. This is used when applying the sweep's Givens
        // rotations.
        n_iter_perf_sweep_max = 0;
 
        // Perform a sweep: Move through the matrix and perform a tridiagonal
        // EVD on each non-zero submatrix that is encountered. During the
        // first time through, ijTL will be 0 and ijBR will be m_A - 1.
        for ( ij_begin = 0; ij_begin < m_A;  )
        {
 
#ifdef PRINTF
if ( ij_begin == 0 )
printf( "FLA_Tevd_v_opd_var2: beginning new sweep (ij_begin = %d)\n", ij_begin );
#endif
 
            // Search for the first submatrix along the diagonal that is
            // bounded by zeroes (or endpoints of the matrix). If no
            // submatrix is found (ie: if the entire subdiagonal is zero
            // then FLA_FAILURE is returned. This function also inspects
            // subdiagonal elements for proximity to zero. If a given
            // element is close enough to zero, then it is deemed
            // converged and manually set to zero.
            r_val = FLA_Tevd_find_submatrix_opd( m_A,
                                                 ij_begin,
                                                 buff_d, inc_d,
                                                 buff_e, inc_e,
                                                 &ijTL,
                                                 &ijBR );
 
            // Verify that a submatrix was found. If one was not found,
            // then we are done with the current sweep. Furthermore, if
            // a submatrix was not found AND we began our search at the
            // beginning of the matrix (ie: ij_begin == 0), then the
            // matrix has completely deflated and so we are done with
            // Francis step iteration.
            if ( r_val == FLA_FAILURE )
            {
                if ( ij_begin == 0 )
                {
#ifdef PRINTF
printf( "FLA_Tevd_v_opd_var2: subdiagonal is completely zero.\n" );
printf( "FLA_Tevd_v_opd_var2: Francis iteration is done!\n" );
#endif
                    done = TRUE;
                }
 
                // Break out of the current sweep so we can apply the last
                // remaining Givens rotations.
                break;
            }
 
            // If we got this far, then:
            //   (a) ijTL refers to the index of the first non-zero
            //       subdiagonal along the diagonal, and
            //   (b) ijBR refers to either:
            //       - the first zero element that occurs after ijTL, or
            //       - the the last diagonal element.
            // Note that ijTL and ijBR also correspond to the first and
            // last diagonal elements of the submatrix of interest. Thus,
            // we may compute the dimension of this submatrix as:
            m_A11 = ijBR - ijTL + 1;
 
#ifdef PRINTF
printf( "FLA_Tevd_v_opd_var2: ij_begin = %d\n", ij_begin );
printf( "FLA_Tevd_v_opd_var2: ijTL     = %d\n", ijTL );
printf( "FLA_Tevd_v_opd_var2: ijBR     = %d\n", ijBR );
printf( "FLA_Tevd_v_opd_var2: m_A11    = %d\n", m_A11 );
#endif
 
            // Adjust ij_begin, which gets us ready for the next subproblem, if
            // there is one.
            ij_begin = ijBR + 1;
 
            // Index to the submatrices upon which we will operate.
            d1 = buff_d + ijTL * inc_d;
            e1 = buff_e + ijTL * inc_e;
            G  = buff_G + ijTL * rs_G;
 
            // Search for a batch of eigenvalues, recursing on deflated
            // subproblems whenever a split occurs. Iteration continues
            // as long as
            //   (a) there is still matrix left to operate on, and
            //   (b) the number of iterations performed in this batch is
            //       less than n_G.
            // If/when either of the two above conditions fails to hold,
            // the function returns.
            n_deflations = FLA_Tevd_iteracc_v_opd_var1( m_A11,
                                                        n_G,
                                                        ijTL,
                                                        d1, inc_d,
                                                        e1, inc_e,
                                                        G,  rs_G, cs_G,
                                                        &n_iter_perf );
 
            // Record the number of deflations that we observed.
            total_deflations += n_deflations;
 
            // Update the maximum number of iterations performed in the
            // current sweep.
            n_iter_perf_sweep_max = max( n_iter_perf_sweep_max, n_iter_perf );
 
#ifdef PRINTF
printf( "FLA_Tevd_v_opd_var2: deflations observed       = %d\n", n_deflations );
printf( "FLA_Tevd_v_opd_var2: total deflations observed = %d\n", total_deflations );
printf( "FLA_Tevd_v_opd_var2: num iterations            = %d\n", n_iter_perf );
#endif
 
            // Store the most recent value of ijBR in m_G_sweep_max.
            // When the sweep is done, this value will contain the minimum
            // number of rows of G we can apply and safely include all
            // non-identity rotations that were computed during the
            // eigenvalue searches.
            m_G_sweep_max = ijBR;
 
            // Make sure we haven't exceeded our maximum iteration count.
            if ( n_iter_prev >= m_A * n_iter_max )
            {
#ifdef PRINTF
printf( "FLA_Tevd_v_opd_var2: reached maximum total number of iterations: %d\n", n_iter_prev );
#endif
                FLA_Abort();
                //return FLA_FAILURE;
            }
        }
 
        // The sweep is complete. Now we must apply the Givens rotations
        // that were accumulated during the sweep.
 
 
        // Recall that the number of columns of U to which we apply
        // rotations is one more than the number of rotations.
        n_U_apply = m_G_sweep_max + 1;
 
        // Apply the Givens rotations that were computed as part of
        // the previous batch of iterations.
        //FLA_Apply_G_rf_bld_var8b( n_iter_perf_sweep_max,
        //FLA_Apply_G_rf_bld_var5b( n_iter_perf_sweep_max,
        FLA_Apply_G_rf_bld_var3b( n_iter_perf_sweep_max,
        //FLA_Apply_G_rf_bld_var9b( n_iter_perf_sweep_max,
        //FLA_Apply_G_rf_bld_var6b( n_iter_perf_sweep_max,
                                  m_U,
                                  n_U_apply,
                                  n_iter_prev,
                                  buff_G, rs_G, cs_G,
                                  buff_R, rs_R, cs_R,
                                  b_alg );
 
#ifdef PRINTF
printf( "FLA_Tevd_v_opd_var2: applying %d sets of Givens rotations\n", n_iter_perf_sweep_max );
#endif
 
        // Increment the total number of iterations previously performed.
        n_iter_prev += n_iter_perf_sweep_max;
    }
 
    // Copy the contents of Q to temporary storage.
    bl1_dcopymt( BLIS1_NO_TRANSPOSE,
                 m_A,
                 m_A,
                 buff_U, rs_U, cs_U,
                 buff_W, rs_W, cs_W );
 
 
    // Multiply Q by R, overwriting U.
    bl1_dgemm( BLIS1_NO_TRANSPOSE,
               BLIS1_NO_TRANSPOSE,
               m_A,
               m_A,
               m_A,
               &rone,
               ( double* )buff_W, rs_W, cs_W,
                          buff_R, rs_R, cs_R,
               &rzero,
               ( double* )buff_U, rs_U, cs_U );
 
    return n_iter_prev;
}

References bl1_d0(), bl1_d1(), bl1_dcopymt(), bl1_dgemm(), bl1_dident(), bl1_z1(), bl1_zsetm(), BLIS1_NO_TRANSPOSE, FLA_Abort(), FLA_Apply_G_rf_bld_var3b(), FLA_Tevd_find_submatrix_opd(), FLA_Tevd_iteracc_v_opd_var1(), and i.

Referenced by FLA_Tevd_v_opt_var2().

FLA_Tevd_v_ops_var2()

FLA_Error FLA_Tevd_v_ops_var2	(	int	m_A,
		int	m_U,
		int	n_G,
		int	n_iter_max,
		float *	buff_d,
		int	inc_d,
		float *	buff_e,
		int	inc_e,
		scomplex *	buff_G,
		int	rs_G,
		int	cs_G,
		float *	buff_R,
		int	rs_R,
		int	cs_R,
		float *	buff_W,
		int	rs_W,
		int	cs_W,
		float *	buff_U,
		int	rs_U,
		int	cs_U,
		int	b_alg
	)

{
    FLA_Check_error_code( FLA_NOT_YET_IMPLEMENTED );
 
    return FLA_SUCCESS;
}

References i.

Referenced by FLA_Tevd_v_opt_var2().

FLA_Tevd_v_opt_var2()

FLA_Error FLA_Tevd_v_opt_var2	(	dim_t	n_iter_max,
		FLA_Obj	d,
		FLA_Obj	e,
		FLA_Obj	G,
		FLA_Obj	R,
		FLA_Obj	W,
		FLA_Obj	U,
		dim_t	b_alg
	)

{
    FLA_Error    r_val = FLA_SUCCESS;
    FLA_Datatype datatype;
    int          m_A, m_U, n_G;
    int          inc_d;
    int          inc_e;
    int          rs_G, cs_G;
    int          rs_R, cs_R;
    int          rs_U, cs_U;
    int          rs_W, cs_W;
 
    datatype = FLA_Obj_datatype( U );
 
    m_A       = FLA_Obj_vector_dim( d );
    m_U       = FLA_Obj_length( U );
    n_G       = FLA_Obj_width( G );
 
    inc_d     = FLA_Obj_vector_inc( d );
    inc_e     = FLA_Obj_vector_inc( e );
    
    rs_G      = FLA_Obj_row_stride( G );
    cs_G      = FLA_Obj_col_stride( G );
 
    rs_R      = FLA_Obj_row_stride( R );
    cs_R      = FLA_Obj_col_stride( R );
 
    rs_W      = FLA_Obj_row_stride( W );
    cs_W      = FLA_Obj_col_stride( W );
 
    rs_U      = FLA_Obj_row_stride( U );
    cs_U      = FLA_Obj_col_stride( U );
 
 
    switch ( datatype )
    {
        case FLA_FLOAT:
        {
            float*    buff_d = FLA_FLOAT_PTR( d );
            float*    buff_e = FLA_FLOAT_PTR( e );
            scomplex* buff_G = FLA_COMPLEX_PTR( G );
            float*    buff_R = FLA_FLOAT_PTR( R );
            float*    buff_W = FLA_FLOAT_PTR( W );
            float*    buff_U = FLA_FLOAT_PTR( U );
 
            r_val = FLA_Tevd_v_ops_var2( m_A,
                                         m_U,
                                         n_G,
                                         n_iter_max,
                                         buff_d, inc_d,
                                         buff_e, inc_e,
                                         buff_G, rs_G, cs_G,
                                         buff_R, rs_R, cs_R,
                                         buff_W, rs_W, cs_W,
                                         buff_U, rs_U, cs_U,
                                         b_alg );
 
            break;
        }
 
        case FLA_DOUBLE:
        {
            double*   buff_d = FLA_DOUBLE_PTR( d );
            double*   buff_e = FLA_DOUBLE_PTR( e );
            dcomplex* buff_G = FLA_DOUBLE_COMPLEX_PTR( G );
            double*   buff_R = FLA_DOUBLE_PTR( R );
            double*   buff_W = FLA_DOUBLE_PTR( W );
            double*   buff_U = FLA_DOUBLE_PTR( U );
 
            r_val = FLA_Tevd_v_opd_var2( m_A,
                                         m_U,
                                         n_G,
                                         n_iter_max,
                                         buff_d, inc_d,
                                         buff_e, inc_e,
                                         buff_G, rs_G, cs_G,
                                         buff_R, rs_R, cs_R,
                                         buff_W, rs_W, cs_W,
                                         buff_U, rs_U, cs_U,
                                         b_alg );
 
            break;
        }
 
        case FLA_COMPLEX:
        {
            float*    buff_d = FLA_FLOAT_PTR( d );
            float*    buff_e = FLA_FLOAT_PTR( e );
            scomplex* buff_G = FLA_COMPLEX_PTR( G );
            float*    buff_R = FLA_FLOAT_PTR( R );
            scomplex* buff_W = FLA_COMPLEX_PTR( W );
            scomplex* buff_U = FLA_COMPLEX_PTR( U );
 
            r_val = FLA_Tevd_v_opc_var2( m_A,
                                         m_U,
                                         n_G,
                                         n_iter_max,
                                         buff_d, inc_d,
                                         buff_e, inc_e,
                                         buff_G, rs_G, cs_G,
                                         buff_R, rs_R, cs_R,
                                         buff_W, rs_W, cs_W,
                                         buff_U, rs_U, cs_U,
                                         b_alg );
 
            break;
        }
 
        case FLA_DOUBLE_COMPLEX:
        {
            double*   buff_d = FLA_DOUBLE_PTR( d );
            double*   buff_e = FLA_DOUBLE_PTR( e );
            dcomplex* buff_G = FLA_DOUBLE_COMPLEX_PTR( G );
            double*   buff_R = FLA_DOUBLE_PTR( R );
            dcomplex* buff_W = FLA_DOUBLE_COMPLEX_PTR( W );
            dcomplex* buff_U = FLA_DOUBLE_COMPLEX_PTR( U );
 
            r_val = FLA_Tevd_v_opz_var2( m_A,
                                         m_U,
                                         n_G,
                                         n_iter_max,
                                         buff_d, inc_d,
                                         buff_e, inc_e,
                                         buff_G, rs_G, cs_G,
                                         buff_R, rs_R, cs_R,
                                         buff_W, rs_W, cs_W,
                                         buff_U, rs_U, cs_U,
                                         b_alg );
 
            break;
        }
    }
 
    return r_val;
}

References FLA_Obj_col_stride(), FLA_Obj_datatype(), FLA_Obj_length(), FLA_Obj_row_stride(), FLA_Obj_vector_dim(), FLA_Obj_vector_inc(), FLA_Obj_width(), FLA_Tevd_v_opc_var2(), FLA_Tevd_v_opd_var2(), FLA_Tevd_v_ops_var2(), FLA_Tevd_v_opz_var2(), and i.

Referenced by FLA_Hevd_lv_unb_var2().

FLA_Tevd_v_opz_var2()

FLA_Error FLA_Tevd_v_opz_var2	(	int	m_A,
		int	m_U,
		int	n_G,
		int	n_iter_max,
		double *	buff_d,
		int	inc_d,
		double *	buff_e,
		int	inc_e,
		dcomplex *	buff_G,
		int	rs_G,
		int	cs_G,
		double *	buff_R,
		int	rs_R,
		int	cs_R,
		dcomplex *	buff_W,
		int	rs_W,
		int	cs_W,
		dcomplex *	buff_U,
		int	rs_U,
		int	cs_U,
		int	b_alg
	)

{
    dcomplex  one   = bl1_z1();
    double    rone  = bl1_d1();
    double    rzero = bl1_d0();
 
    dcomplex* G;
    double*   d1;
    double*   e1;
    int       r_val;
    int       done;
    int       m_G_sweep_max;
    int       ij_begin;
    int       ijTL, ijBR;
    int       m_A11;
    int       n_iter_perf;
    int       n_U_apply;
    int       total_deflations;
    int       n_deflations;
    int       n_iter_prev;
    int       n_iter_perf_sweep_max;
 
    // Initialize our completion flag.
    done = FALSE;
 
    // Initialize a counter that holds the maximum number of rows of G
    // that we would need to initialize for the next sweep.
    m_G_sweep_max = m_A - 1;
 
    // Initialize a counter for the total number of iterations performed.
    n_iter_prev = 0;
 
    // Initialize R to identity.
    bl1_dident( m_A,
                buff_R, rs_R, cs_R );
 
    // Iterate until the matrix has completely deflated.
    for ( total_deflations = 0; done != TRUE; )
    {
 
        // Initialize G to contain only identity rotations.
        bl1_zsetm( m_G_sweep_max,
                   n_G,
                   &one,
                   buff_G, rs_G, cs_G );
 
        // Keep track of the maximum number of iterations performed in the
        // current sweep. This is used when applying the sweep's Givens
        // rotations.
        n_iter_perf_sweep_max = 0;
 
        // Perform a sweep: Move through the matrix and perform a tridiagonal
        // EVD on each non-zero submatrix that is encountered. During the
        // first time through, ijTL will be 0 and ijBR will be m_A - 1.
        for ( ij_begin = 0; ij_begin < m_A;  )
        {
 
#ifdef PRINTF
if ( ij_begin == 0 )
printf( "FLA_Tevd_v_opz_var2: beginning new sweep (ij_begin = %d)\n", ij_begin );
#endif
 
            // Search for the first submatrix along the diagonal that is
            // bounded by zeroes (or endpoints of the matrix). If no
            // submatrix is found (ie: if the entire subdiagonal is zero
            // then FLA_FAILURE is returned. This function also inspects
            // subdiagonal elements for proximity to zero. If a given
            // element is close enough to zero, then it is deemed
            // converged and manually set to zero.
            r_val = FLA_Tevd_find_submatrix_opd( m_A,
                                                 ij_begin,
                                                 buff_d, inc_d,
                                                 buff_e, inc_e,
                                                 &ijTL,
                                                 &ijBR );
 
            // Verify that a submatrix was found. If one was not found,
            // then we are done with the current sweep. Furthermore, if
            // a submatrix was not found AND we began our search at the
            // beginning of the matrix (ie: ij_begin == 0), then the
            // matrix has completely deflated and so we are done with
            // Francis step iteration.
            if ( r_val == FLA_FAILURE )
            {
                if ( ij_begin == 0 )
                {
#ifdef PRINTF
printf( "FLA_Tevd_v_opz_var2: subdiagonal is completely zero.\n" );
printf( "FLA_Tevd_v_opz_var2: Francis iteration is done!\n" );
#endif
                    done = TRUE;
                }
 
                // Break out of the current sweep so we can apply the last
                // remaining Givens rotations.
                break;
            }
 
            // If we got this far, then:
            //   (a) ijTL refers to the index of the first non-zero
            //       subdiagonal along the diagonal, and
            //   (b) ijBR refers to either:
            //       - the first zero element that occurs after ijTL, or
            //       - the the last diagonal element.
            // Note that ijTL and ijBR also correspond to the first and
            // last diagonal elements of the submatrix of interest. Thus,
            // we may compute the dimension of this submatrix as:
            m_A11 = ijBR - ijTL + 1;
 
#ifdef PRINTF
printf( "FLA_Tevd_v_opz_var2: ij_begin = %d\n", ij_begin );
printf( "FLA_Tevd_v_opz_var2: ijTL     = %d\n", ijTL );
printf( "FLA_Tevd_v_opz_var2: ijBR     = %d\n", ijBR );
printf( "FLA_Tevd_v_opz_var2: m_A11    = %d\n", m_A11 );
#endif
 
            // Adjust ij_begin, which gets us ready for the next subproblem, if
            // there is one.
            ij_begin = ijBR + 1;
 
            // Index to the submatrices upon which we will operate.
            d1 = buff_d + ijTL * inc_d;
            e1 = buff_e + ijTL * inc_e;
            G  = buff_G + ijTL * rs_G;
 
            // Search for a batch of eigenvalues, recursing on deflated
            // subproblems whenever a split occurs. Iteration continues
            // as long as
            //   (a) there is still matrix left to operate on, and
            //   (b) the number of iterations performed in this batch is
            //       less than n_G.
            // If/when either of the two above conditions fails to hold,
            // the function returns.
            n_deflations = FLA_Tevd_iteracc_v_opd_var1( m_A11,
                                                        n_G,
                                                        ijTL,
                                                        d1, inc_d,
                                                        e1, inc_e,
                                                        G,  rs_G, cs_G,
                                                        &n_iter_perf );
 
            // Record the number of deflations that we observed.
            total_deflations += n_deflations;
 
            // Update the maximum number of iterations performed in the
            // current sweep.
            n_iter_perf_sweep_max = max( n_iter_perf_sweep_max, n_iter_perf );
 
#ifdef PRINTF
printf( "FLA_Tevd_v_opz_var2: deflations observed       = %d\n", n_deflations );
printf( "FLA_Tevd_v_opz_var2: total deflations observed = %d\n", total_deflations );
printf( "FLA_Tevd_v_opz_var2: num iterations            = %d\n", n_iter_perf );
#endif
 
            // Store the most recent value of ijBR in m_G_sweep_max.
            // When the sweep is done, this value will contain the minimum
            // number of rows of G we can apply and safely include all
            // non-identity rotations that were computed during the
            // eigenvalue searches.
            m_G_sweep_max = ijBR;
 
            // Make sure we haven't exceeded our maximum iteration count.
            if ( n_iter_prev >= m_A * n_iter_max )
            {
#ifdef PRINTF
printf( "FLA_Tevd_v_opz_var2: reached maximum total number of iterations: %d\n", n_iter_prev );
#endif
                FLA_Abort();
                //return FLA_FAILURE;
            }
        }
 
        // The sweep is complete. Now we must apply the Givens rotations
        // that were accumulated during the sweep.
 
 
        // Recall that the number of columns of U to which we apply
        // rotations is one more than the number of rotations.
        n_U_apply = m_G_sweep_max + 1;
 
        // Apply the Givens rotations that were computed as part of
        // the previous batch of iterations.
        //FLA_Apply_G_rf_bld_var8b( n_iter_perf_sweep_max,
        //FLA_Apply_G_rf_bld_var5b( n_iter_perf_sweep_max,
        FLA_Apply_G_rf_bld_var3b( n_iter_perf_sweep_max,
        //FLA_Apply_G_rf_bld_var9b( n_iter_perf_sweep_max,
        //FLA_Apply_G_rf_bld_var6b( n_iter_perf_sweep_max,
                                  m_U,
                                  n_U_apply,
                                  n_iter_prev,
                                  buff_G, rs_G, cs_G,
                                  buff_R, rs_R, cs_R,
                                  b_alg );
 
#ifdef PRINTF
printf( "FLA_Tevd_v_opz_var2: applying %d sets of Givens rotations\n", n_iter_perf_sweep_max );
#endif
 
        // Increment the total number of iterations previously performed.
        n_iter_prev += n_iter_perf_sweep_max;
    }
 
    // Copy the contents of Q to temporary storage.
    bl1_zcopymt( BLIS1_NO_TRANSPOSE,
                 m_A,
                 m_A,
                 buff_U, rs_U, cs_U,
                 buff_W, rs_W, cs_W );
 
 
    // Multiply Q by R, overwriting U.
    bl1_dgemm( BLIS1_NO_TRANSPOSE,
               BLIS1_NO_TRANSPOSE,
               2*m_A,
               m_A,
               m_A,
               &rone,
               ( double* )buff_W, rs_W, 2*cs_W,
                          buff_R, rs_R,   cs_R,
               &rzero,
               ( double* )buff_U, rs_U, 2*cs_U );
 
    return n_iter_prev;
}

References bl1_d0(), bl1_d1(), bl1_dgemm(), bl1_dident(), bl1_z1(), bl1_zcopymt(), bl1_zsetm(), BLIS1_NO_TRANSPOSE, FLA_Abort(), FLA_Apply_G_rf_bld_var3b(), FLA_Tevd_find_submatrix_opd(), FLA_Tevd_iteracc_v_opd_var1(), and i.

Referenced by FLA_Tevd_v_opt_var2().