FLA_Apply_Q_UT_rhfr.h File Reference

(r)

Go to the source code of this file.

Functions
FLA_Error	FLA_Apply_Q_UT_rhfr_blk_var1 (FLA_Obj A, FLA_Obj T, FLA_Obj W, FLA_Obj B, fla_apqut_t *cntl)
FLA_Error	FLA_Apply_Q_UT_rhfr_blk_var2 (FLA_Obj A, FLA_Obj T, FLA_Obj W, FLA_Obj B, fla_apqut_t *cntl)
FLA_Error	FLA_Apply_Q_UT_rhfr_blk_var3 (FLA_Obj A, FLA_Obj T, FLA_Obj W, FLA_Obj B, fla_apqut_t *cntl)

Function Documentation

FLA_Apply_Q_UT_rhfr_blk_var1()

FLA_Error FLA_Apply_Q_UT_rhfr_blk_var1	(	FLA_Obj	A,
		FLA_Obj	T,
		FLA_Obj	W,
		FLA_Obj	B,
		fla_apqut_t *	cntl
	)

{
  FLA_Obj ATL,   ATR,      A00, A01, A02, 
          ABL,   ABR,      A10, A11, A12,
                           A20, A21, A22;
 
  FLA_Obj TL,    TR,       T0,  T1,  T2;
 
  FLA_Obj T1T,
          T2B;
 
  FLA_Obj WTL,  WTR,
          WBL,  WBR;
 
  FLA_Obj BL,    BR,       B0,  B1,  B2;
 
  dim_t   b_alg, b;
  dim_t   m_BR, n_BR;
 
  // Query the algorithmic blocksize by inspecting the length of T.
  b_alg = FLA_Obj_length( T );
 
  // If m < n, then we have to initialize our partitionings carefully so
  // that we begin in the proper location in A and B (since we traverse
  // matrix A from BR to TL).
  if ( FLA_Obj_length( A ) < FLA_Obj_width( A ) )
  {
    m_BR = 0;
    n_BR = FLA_Obj_width( A ) - FLA_Obj_length( A );
  }
  else if ( FLA_Obj_length( A ) > FLA_Obj_width( A ) )
  {
    m_BR = FLA_Obj_length( A ) - FLA_Obj_width( A );
    n_BR = 0;
  }
  else
  {
    m_BR = 0;
    n_BR = 0;
  }
 
  FLA_Part_2x2( A,    &ATL, &ATR,
                      &ABL, &ABR,     m_BR, n_BR, FLA_BR );
 
  // A and T are dependent; we determine T matrix w.r.t. A
  FLA_Part_1x2( T,    &TL,  &TR,      FLA_Obj_min_dim( A ), FLA_LEFT );
 
  // Be carefule that A contains reflector in row-wise;
  // corresponding B should be partitioned with n_BR.
  FLA_Part_1x2( B,    &BL,  &BR,      n_BR, FLA_RIGHT );
 
  while ( FLA_Obj_min_dim( ATL ) > 0 ){
 
    b = min( b_alg, FLA_Obj_min_dim( ATL ) );
 
    // Since T was filled from left to right, and since we need to access them
    // in reverse order, we need to handle the case where the last block is
    // smaller than the other b x b blocks.
    if ( FLA_Obj_width( TR ) == 0 && FLA_Obj_width( T ) % b_alg > 0 )
      b = FLA_Obj_width( T ) % b_alg;
 
    FLA_Repart_2x2_to_3x3( ATL, /**/ ATR,       &A00, &A01, /**/ &A02,
                                                &A10, &A11, /**/ &A12,
                        /* ************* */   /* ******************** */
                           ABL, /**/ ABR,       &A20, &A21, /**/ &A22,
                           b, b, FLA_TL );
 
    FLA_Repart_1x2_to_1x3( TL,  /**/ TR,        &T0, &T1, /**/ &T2,
                           b, FLA_LEFT );
 
    FLA_Repart_1x2_to_1x3( BL,  /**/ BR,        &B0, &B1, /**/ &B2,
                           b, FLA_LEFT );
 
    /*------------------------------------------------------------*/
 
    FLA_Part_2x1( T1,    &T1T, 
                         &T2B,     b, FLA_TOP );
 
    FLA_Part_2x2( W,     &WTL, &WTR,
                         &WBL, &WBR,     b, FLA_Obj_length( B1 ), FLA_TL );
 
    // WTL = B1^T;
 
    FLA_Copyt_internal( FLA_TRANSPOSE, B1, WTL,
                        FLA_Cntl_sub_copyt( cntl ) );
 
    // U11 = triuu( A11 );
    // U12 = A12;
    // Let WTL^T be conformal to B1.
    //
    // WTL^T = ( B1 * U11^T + B2 * U12^T ) * inv( triu(T1T)' );
    // WTL   = inv( conj(triu(T1T)) ) * ( U11 * B1^T + U12 * B2^T );
 
    FLA_Trmm_internal( FLA_LEFT, FLA_UPPER_TRIANGULAR,
                       FLA_NO_TRANSPOSE, FLA_UNIT_DIAG,
                       FLA_ONE, A11, WTL,
                       FLA_Cntl_sub_trmm1( cntl ) );
 
    FLA_Gemm_internal( FLA_NO_TRANSPOSE, FLA_TRANSPOSE, 
                       FLA_ONE, A12, B2, FLA_ONE, WTL,
                       FLA_Cntl_sub_gemm1( cntl ) );
 
    FLA_Trsm_internal( FLA_LEFT, FLA_UPPER_TRIANGULAR,
                       FLA_CONJ_NO_TRANSPOSE, FLA_NONUNIT_DIAG,
                       FLA_ONE, T1T, WTL,
                       FLA_Cntl_sub_trsm( cntl ) );
 
    // B2 = B2 - WTL^T * conj(U12);
    // B1 = B1 - WTL^T * conj(U11);
    //    = B1 - ( U11' * WTL )^T;
 
    FLA_Gemm_internal( FLA_TRANSPOSE, FLA_CONJ_NO_TRANSPOSE,
                       FLA_MINUS_ONE, WTL, A12, FLA_ONE, B2,
                       FLA_Cntl_sub_gemm2( cntl ) );
 
    FLA_Trmm_internal( FLA_LEFT, FLA_UPPER_TRIANGULAR,
                       FLA_CONJ_TRANSPOSE, FLA_UNIT_DIAG,
                       FLA_MINUS_ONE, A11, WTL,
                       FLA_Cntl_sub_trmm2( cntl ) );
 
    FLA_Axpyt_internal( FLA_TRANSPOSE, FLA_ONE, WTL, B1,
                        FLA_Cntl_sub_axpyt( cntl ) );
 
    /*------------------------------------------------------------*/
 
    FLA_Cont_with_3x3_to_2x2( &ATL, /**/ &ATR,       A00, /**/ A01, A02,
                            /* ************** */  /* ****************** */
                                                     A10, /**/ A11, A12,
                              &ABL, /**/ &ABR,       A20, /**/ A21, A22,
                              FLA_BR );
 
    FLA_Cont_with_1x3_to_1x2( &TL,  /**/ &TR,        T0, /**/ T1, T2,
                              FLA_RIGHT );
 
    FLA_Cont_with_1x3_to_1x2( &BL,  /**/ &BR,        B0, /**/ B1, B2,
                              FLA_RIGHT );
  }
 
  return FLA_SUCCESS;
}

References FLA_Axpyt_internal(), FLA_Cont_with_1x3_to_1x2(), FLA_Cont_with_3x3_to_2x2(), FLA_Copyt_internal(), FLA_Gemm_internal(), FLA_MINUS_ONE, FLA_Obj_length(), FLA_Obj_min_dim(), FLA_Obj_width(), FLA_ONE, FLA_Part_1x2(), FLA_Part_2x1(), FLA_Part_2x2(), FLA_Repart_1x2_to_1x3(), FLA_Repart_2x2_to_3x3(), FLA_Trmm_internal(), FLA_Trsm_internal(), and i.

Referenced by FLA_Apply_Q_UT_rhfr().

FLA_Apply_Q_UT_rhfr_blk_var2()

FLA_Error FLA_Apply_Q_UT_rhfr_blk_var2	(	FLA_Obj	A,
		FLA_Obj	T,
		FLA_Obj	W,
		FLA_Obj	B,
		fla_apqut_t *	cntl
	)

{
  FLA_Obj BT,              B0,
          BB,              B1,
                           B2;
 
  FLA_Obj WL,    WR,       W0,  W1,  W2;
 
  dim_t b;
 
  FLA_Part_2x1( B,    &BT, 
                      &BB,            0, FLA_TOP );
 
  FLA_Part_1x2( W,    &WL,  &WR,      0, FLA_LEFT );
 
  while ( FLA_Obj_length( BT ) < FLA_Obj_length( B ) ){
 
    b = FLA_Determine_blocksize( BT, FLA_TOP, FLA_Cntl_blocksize( cntl ) );
 
    FLA_Repart_2x1_to_3x1( BT,                &B0, 
                        /* ** */            /* ** */
                                              &B1, 
                           BB,                &B2,        b, FLA_BOTTOM );
 
    FLA_Repart_1x2_to_1x3( WL,  /**/ WR,        &W0, /**/ &W1, &W2,
                           b, FLA_RIGHT );
 
    /*------------------------------------------------------------*/
 
    // B1 = B1 * Q';
    FLA_Apply_Q_UT_internal( FLA_RIGHT, FLA_CONJ_TRANSPOSE, FLA_FORWARD, FLA_ROWWISE,
                             A, T, W1, B1,
                             FLA_Cntl_sub_apqut( cntl ) );
 
    /*------------------------------------------------------------*/
 
    FLA_Cont_with_3x1_to_2x1( &BT,                B0, 
                                                  B1, 
                            /* ** */           /* ** */
                              &BB,                B2,     FLA_TOP );
 
    FLA_Cont_with_1x3_to_1x2( &WL,  /**/ &WR,        W0, W1, /**/ W2,
                              FLA_LEFT );
  }
 
  return FLA_SUCCESS;
}

References FLA_Apply_Q_UT_internal(), FLA_Cont_with_1x3_to_1x2(), FLA_Cont_with_3x1_to_2x1(), FLA_Determine_blocksize(), FLA_Obj_length(), FLA_Part_1x2(), FLA_Part_2x1(), FLA_Repart_1x2_to_1x3(), FLA_Repart_2x1_to_3x1(), and i.

Referenced by FLA_Apply_Q_UT_rhfr().

FLA_Apply_Q_UT_rhfr_blk_var3()

FLA_Error FLA_Apply_Q_UT_rhfr_blk_var3	(	FLA_Obj	A,
		FLA_Obj	T,
		FLA_Obj	W,
		FLA_Obj	B,
		fla_apqut_t *	cntl
	)

{
  FLA_Obj ATL,   ATR,      A00, A01, A02, 
          ABL,   ABR,      A10, A11, A12,
                           A20, A21, A22;
 
  FLA_Obj TWTL,  TWTR,     TW00, TW01, TW02,
          TWBL,  TWBR,     TW10,  T11,  W12,
                           TW20, TW21, TW22;
 
  FLA_Obj WTL,  WTR,
          WBL,  WBR;
 
  FLA_Obj BL,    BR,       B0,  B1,  B2;
 
  dim_t b, m_BR, n_BR;
 
  // If m < n, then we have to initialize our partitionings carefully so
  // that we begin in the proper location in A and B (since we traverse
  // matrix A from BR to TL).
  if ( FLA_Obj_length( A ) < FLA_Obj_width( A ) )
  {
    m_BR = 0;
    n_BR = FLA_Obj_width( A ) - FLA_Obj_length( A );
  }
  else
  {
    m_BR = 0;
    n_BR = 0;
  }
 
  FLA_Part_2x2( A,    &ATL, &ATR,
                      &ABL, &ABR,     m_BR, n_BR, FLA_BR );
 
  FLA_Part_2x2( TW,   &TWTL, &TWTR,    
                      &TWBL, &TWBR,    0, 0, FLA_BR );
 
  FLA_Part_1x2( B,    &BL,  &BR,      n_BR, FLA_RIGHT );
 
  while ( FLA_Obj_min_dim( ATL ) > 0 ){
 
    b = FLA_Determine_blocksize( ATL, FLA_TL, FLA_Cntl_blocksize( cntl ) );
 
    // Since T was filled from TL to BR, and since we need to access them in
    // reverse order, we need to handle the case where the bottom-right-most
    // block is smaller than the other b x b blocks.
    if ( FLA_Obj_width( TWBR ) == 0 &&
         FLA_Obj_width( TW ) % b > 0 )
      b = FLA_Obj_width( TW ) % b;
 
    FLA_Repart_2x2_to_3x3( ATL, /**/ ATR,       &A00, &A01, /**/ &A02,
                                                &A10, &A11, /**/ &A12,
                        /* ************* */   /* ******************** */
                           ABL, /**/ ABR,       &A20, &A21, /**/ &A22,
                           b, b, FLA_TL );
 
    FLA_Repart_2x2_to_3x3( TWTL, /**/ TWTR,       &TW00, &TW01, /**/ &TW02,
                                                  &TW10,  &T11, /**/  &W12,
                        /* *************** */   /* *********************** */
                           TWBL, /**/ TWBR,       &TW20, &TW21, /**/ &TW22,
                           b, b, FLA_TL );
 
    FLA_Repart_1x2_to_1x3( BL,  /**/ BR,        &B0, &B1, /**/ &B2,
                           b, FLA_LEFT );
 
    /*------------------------------------------------------------*/
 
    FLA_Part_2x2( W,     &WTL, &WTR,
                         &WBL, &WBR,     b, FLA_Obj_length( B1 ), FLA_TL );
 
    // WTL = B1;
 
    FLA_Copyt_internal( FLA_TRANSPOSE, B1, WTL,
                        FLA_Cntl_sub_copyt( cntl ) );
 
    // U11 = trilu( A11 );
    // U12 = A12;
    // Let WTL^T be conformal to B1.
    //
    // WTL^T = ( B1 * U11^T + B2 * U12^T ) * inv( triu(T1T)' );
    // WTL   = inv( conj(triu(T1T)) ) * ( U11 * B1^T + U12 * B2^T );
 
    FLA_Trmm_internal( FLA_LEFT, FLA_UPPER_TRIANGULAR,
                       FLA_NO_TRANSPOSE, FLA_UNIT_DIAG,
                       FLA_ONE, A11, WTL,
                       FLA_Cntl_sub_trmm1( cntl ) );
 
    FLA_Gemm_internal( FLA_NO_TRANSPOSE, FLA_TRANSPOSE, 
                       FLA_ONE, A12, B2, FLA_ONE, WTL,
                       FLA_Cntl_sub_gemm1( cntl ) );
 
    FLA_Trsm_internal( FLA_LEFT, FLA_UPPER_TRIANGULAR,
                       FLA_CONJ_NO_TRANSPOSE, FLA_NONUNIT_DIAG,
                       FLA_ONE, T11, WTL,
                       FLA_Cntl_sub_trsm( cntl ) );
 
    // B2 = B2 - WTL^T * conj(U12);
    // B1 = B1 - WTL^T * conj(U11);
    //    = B1 - ( U11' * WTL )^T;
 
    FLA_Gemm_internal( FLA_TRANSPOSE, FLA_CONJ_NO_TRANSPOSE,
                       FLA_MINUS_ONE, WTL, A12, FLA_ONE, B2,
                       FLA_Cntl_sub_gemm2( cntl ) );
 
    FLA_Trmm_internal( FLA_LEFT, FLA_UPPER_TRIANGULAR,
                       FLA_CONJ_TRANSPOSE, FLA_UNIT_DIAG,
                       FLA_MINUS_ONE, A11, WTL,
                       FLA_Cntl_sub_trmm2( cntl ) );
 
    FLA_Axpyt_internal( FLA_TRANSPOSE, FLA_ONE, WTL, B1,
                        FLA_Cntl_sub_axpyt( cntl ) );
 
    /*------------------------------------------------------------*/
 
    FLA_Cont_with_3x3_to_2x2( &ATL, /**/ &ATR,       A00, /**/ A01, A02,
                            /* ************** */  /* ****************** */
                                                     A10, /**/ A11, A12,
                              &ABL, /**/ &ABR,       A20, /**/ A21, A22,
                              FLA_BR );
 
    FLA_Cont_with_3x3_to_2x2( &TWTL, /**/ &TWTR,       TW00, /**/ TW01, TW02,
                            /* **************** */  /* ********************* */
                                                       TW10, /**/  T11,  W12,
                              &TWBL, /**/ &TWBR,       TW20, /**/ TW21, TW22,
                              FLA_BR );
 
    FLA_Cont_with_1x3_to_1x2( &BL,  /**/ &BR,        B0, /**/ B1, B2,
                              FLA_RIGHT );
  }
 
  return FLA_SUCCESS;
}

References FLA_Axpyt_internal(), FLA_Cont_with_1x3_to_1x2(), FLA_Cont_with_3x3_to_2x2(), FLA_Copyt_internal(), FLA_Determine_blocksize(), FLA_Gemm_internal(), FLA_MINUS_ONE, FLA_Obj_length(), FLA_Obj_min_dim(), FLA_Obj_width(), FLA_ONE, FLA_Part_1x2(), FLA_Part_2x2(), FLA_Repart_1x2_to_1x3(), FLA_Repart_2x2_to_3x3(), FLA_Trmm_internal(), FLA_Trsm_internal(), and i.

Referenced by FLA_Apply_Q_UT_rhfr().